Visit Our
Other Websites:
Visit Panasonic SUNX Senors Website
Visit Optex FA Sensor Website
(800) 328-6236
  • High Tech Automation Distributor
  • Ramco Onsite Visit
  • Semi Conductor Assembly

Training

CX-Programmer Basic

This course will provide a basic understanding of how to program an Omron PLC utilizing the CX-Programmer.  Upon completion of this course, the student will have a basic understanding of how to get online, program, and troubleshoot Omron PLCs.

Training Length: Full Day
Training Cost: $500
Lunch will be provided
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

Omron CX-One Custom

This is a customized course designed to provide one-on-one training on a specific topic of the customer’s choosing surrounding the CX One Product Suite. This will be a hands-on course.

Training Length: Varies
Training Cost: $125/hour
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

Banner Presence Plus Basic

This course will provide a basic understanding of Banner Presence Plus software utilizing Banner’s P4 Omni camera. Upon completion of this course, the student will have a basic knowledge of troubleshooting and camera programming basics. This will be a hands-on course; demo units and labs will be provided.

Training Length: Half Day
Training Cost: $250
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

Banner Presence Plus Advanced

This course will provide knowledge on some of the more advanced features of the Presence Plus including networking and communication to a PLC. Upon completion of this course, the student will have the advanced knowledge to remotely change parameters and collect data from their camera using their PLC. This will be a hands-on course and demo units will be provided. Please bring the PLC on which you would like to learn. Certain PLCs are available upon request.

Prerequisite: Completion of Banner Presence Plus Basic training or basic knowledge of the Banner Presence Plus.
Training Length: Half Day
Training Cost: $250
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

Emerson Power Tools Basic

This course will provide a basic understanding of Emerson Power Tools focusing on the Epsilon ‘Indexing’ drive. Upon completion of this course the student will be able to successfully program and troubleshoot Emerson servo drives utilizing Power Tools. This will be a hands-on course; demo units and labs will be provided.

Training Length: Half Day
Training Cost: $250
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

Emerson Power Tools Advanced

This course will provide an advanced understanding of Emerson Power Tools focusing on the Epsilon ‘Programmable Drive’. Upon completion of this course, the student will be able to successfully program and troubleshoot Emerson servos’ Programmable Drives. This will be a hands-on course; demo units and labs will be provided.

Prerequisite: Completion of the Emerson Power Tools Basic training or basic knowledge of Emerson Power Tools.
Training Length: Half Day
Training Cost: $250
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

Emerson Power Tools Networking

This course will provide a basic understanding of how to communicate over a network with an Emerson Programmable Drive. Upon completion of this course, the student will be able to communicate data over Ethernet or Serial with a PLC. This will be a hands-on course and demo units will be provided. Please bring the PLC on which you would like to learn. Certain PLCs are available upon request.

Prerequisite: Completion of the Emerson Power Tools Basic training and completion of the Emerson Power Tools Advanced training or advanced knowledge of Emmerson Power Tools.
Training Length: Half Day
Training Cost: $250
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

Unitronics OPLC Basic

This course will provide a basic understanding of how to program Unitronics OPLCs, specifically the VisiLogic series.  Upon completion of this course, the student will have the basic knowledge to get online, program, and troubleshoot Unitronics OPLC’s.  This will be a hands-on course; PLCs and labs will be provided.

Training Length: Full Day
Training Cost: $500
Lunch will be provided
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

Unitronics OPLC Custom

This is a customized course designed to provide one-on-one training on a specific topic of the customer’s choosing surrounding the Unitronics OPLCs, specifically the VisiLogic series.  This will be a hands-on course.

Training Length: Varies
Training Cost: $125/hour
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

Omron NS Screens

This course will provide the basic tools needed to program Omron NS Screens utilizing the CX Designer Programming Software.  Upon completion of this course, the student will have an understanding of the basic user buttons, indicators, and variables as well as the ability to upload and download a program.  This will be a hands-on course and labs will be provided.

Training Length: Full Day
Training Cost: $500
Lunch will be provided
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

NJ Basic Sysmac

This course will provide a basic understanding of how to program the NJ series machine controller utilizing Sysmac Studio.  Upon completion of this course, the student will have the basic knowledge to be able to get online, program, and troubleshoot the NJ machine controller, as well as the ability to navigate through the Sysmac Studio Software.  This will be a hands-on course and labs will be provided.

Training Length: Full Day
Training Cost: $500
Lunch will be provided
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!

NJ Sysmac Motion

This course will provide a basic understanding of how to program motion commands utilizing the Sysmac Studio and the NJ series machine controller.  Upon completion of this course, the student will have the knowledge to setup a servo axis, program jog moves, indexing moves, homing sequences, and write a basic program.  This will be a hands-on course and labs will be provided.  

Prerequisite: Completion of the NJ Basic Sysmac training or prior knowledge of the NJ series machine controller and the Sysmac Studio Software.
Training Length: Full Day
Training Cost: $500
Lunch will be provided
Email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information or to register for this class!
  • In Iowa:

    Toll Free: (800) 328-6236
    Phone: (515) 225-6933
    Fax: (515) 225-0063

    1207 Maple Street
    P.O. Box 65310
    West Des Moines, Iowa 50265   (map)
    In Nebraska:

    Toll Free: (888) 304-7629
    Phone: (402) 467-4041
    Fax: (402) 467-4072

    5900 N. 58th Street, Suite 2
    Lincoln, Nebraska 68507   (map)
    In Kansas & Missouri:

    Phone: (816) 256-4142
captcha