Panasonic DP2-40N High-Performance Display Digital Pressure Sensor

• LED display digital pressure sensor


• For non-corrosive gas – vacuum – 0 to -14.5 PSI


• 12 to 24 VDC


• Two NPN outputs and 1 to 5VDC analog


• Four programmable output modes


• Programmable display of units of measure


• Pressure port NPT 1/8 female thread

High Accuracy – High Resolution – High Speed
It achieves a 2.5 ms, or less, response time at a high resolution of 1/1,000. It enables highly accurate sensing with its excellent repeatability and temperature characteristics.


Clearly Visible LED Display with 3 1/2 Digits
Bright red LED 7-segment display having 3 1/2 digits, 10 mm 0.394 in high. The displayed figures are remarkably noticeable not only in a dark area, but also in a well-lit place.


Easy Setup
Initialization and threshold value settings are easily done by key operation while seeing the values on the display.


Selection from Six Pressure Units
The pressure unit can be selected from six different systems to suit your requirement. (The selectable pressure units differ with the sensor type. When the pressure unit is changed, the measured pressure value and the set values are automatically converted.)


Four Output Modes Enable Versatile Pressure Level Control

1. Hysteresis Mode
   The common hysteresis of the comparative outputs can be set, as desired, with the set values. Four output modes enable versatile pressure level control
   
   


2. Window Comparator Mode
   The comparative outputs can be turned ON or OFF by a pressure which is within the pressure range set by Set Value 1 and Set Value 2. Four output modes enable versatile pressure level control
   
   


3. Dual Output Mode
   The outputs can be put to different use, such as, detection of different kinds of objects, control function, alarm function etc. Four output modes enable versatile pressure level control
   
   


4. Automatic Sensitivity Setting Mode
   Using actual objects, if the pressure values for OK objects and NG objects are input, then the sensor is automatically set to the optimum pressure value (mid-value).

Analog Voltage Output Incorporated as a Standard
Since a linear analog voltage output (1 to 5 V) is incorporated, the sensor is ideally suited for real time monitoring or for remote control in combination with an analog controller (ultra-compact digital panel controller CA2 series, or digital panel controller CA series).


Peak Hold / Bottom Hold Display
The peak value or the bottom value of the varying pressure can be displayed. This function is convenient for finding the pressure variation range or for determining a reference for pressure settings.


Analog Bar Display
Pressure changes can also be displayed in an analog fashion using LED bars. Hence, sudden pressure changes can be recognized at a glance. (LED bars indicate the pressure level in steps of 10 % F.S., regardless of the pressure unit.)


A Wide Variety of Models
Models are selectable according to mounting style, environmental resistance, and manner of use.This item is now obsolete please contact Ramco for options

---