Optex BS-WP1 Cooling Jacket for BS Series Thermo-Hunter

When optional water-cooled purge pipe BS-WP1 is used together, environmental resistance performance can be further improved. Heat resistant up to 150 ° C when water cooled. Also, by blowing air onto the lens surface, it can be used as an air purge to protect the lens from dust and dirt.

Attaching an air purge/water-cooling jacket to the sensor head provides greatly improved environmental resistance.

Air-Cooled:

Air is blown onto the lens of the surface during cooling to prevent the adhesion of dust. Ambient temperature: Up to 80°C (176°F)

Air flow rate: 50 to 150 Nl/min.

Air temperature: 20°C (68°F)

Air pressure: 0.2 Mpa (2 kgf/cm2) or less (limited to instrumentation air)

Water-Cooled:

Used for cooling only. Use in combination with air cooling can cause scattering of dust. Ambient temperature: Up to 150°C (302°F)

Flow rate: 0.5 to 2 l/min.

Temperature: 30°C (86°F)

Pressure: 0.1 Mpa (1 kgf/cm2) or less

* Instrumentation air or coolant is required.

* There is no need for the NB-SH30A mounting bracket when using this BS-WP1 cooling jacket.

---