Robot Solutions


Robotics
assignment

Engineered Recommendation

Ramco completes a field study to recommend a robotic solution that reduces operating costs, increases competitive advantage, increases product quality and more.

local_shipping

Product Selection & Delivery

Ramco has over 50 years of experience in distribution and logistics, assuring on-time delivery, excellent communication for project planning and quick turnaround on consumables. 

phone_in_talk

On-Going Support

Ramco Innovations has a team of in-house experts at the ready to respond to your needs. Contact us to speak to one of our experts using our contact form, the chat function below or call 800.328.6236.


Omron TM Cobot

OMRON TM Series Collaborative Robot complies with the combined Collaborative Robot scope of ISO 10218-1:2011 and ISO/TS-15066 and can be programmed with both speed and force limits. This robot has the ability to switch between collaborative and non-collaborative mode on the fly. Setup is fast using built-in vision. 3D robot position guidance with advanced 2D vision.

Learn more about TM | TM in Action | Buy Omron TM


Omron HD Mobile Robots

NEW HD-1500 Autonomous Material Transport Robot
  • 1,500 Kg large capacity payload
  • Dynamic intelligent 360° safety
  • Integrated automation controls

Omron LD Mobile Robots

The LD-250 mobile robot is based on the same tested-and-proven technology used in the industry-leading LD-90, with a higher payload capacity and tougher metal skins. Customers can now load more onto robots, or make fewer trips with heavier batches, ultimately doing more with less equipment.

Working seamlessly into an integrated OMRON mobile fleet, the LD-250 can allow customers to optimize their traffic management, battery management, and routing of vehicles with a more diverse fleet.

Learn more about LD | LD in Action | Buy Omron LD Mobile Robot


Omron i4L Scara

New i4Lcompact SCARA robot for precision machining, assembly, and material handling. The offers strong performance at the lowest cost of ownership.

The i4L robot is capable of high speed, high-precision motion with payloads up to 5kg. Its compact design and flexible programming make it ideal for a wide variety of robot applications including digital assembly.

Key Specifications

  • 5 kg payload capacity
  • 350 mm, 450 mm, and 550mm reach options with table and wall mounting options
  • Fast cycle time with an unprecedented range of movement and repeatability
  • Exceptionally powerful built-in servos to handle payloads with ease
  • Advanced and robust industrial design
  • Lowest total cost of ownership
  • Optimize your line with maximum uptime by means of interactive maintenance alarms and an RGB dome light
  • Learn more about i4L | i4L in Action | Buy Omron i4L

Learn more about i4L | i4L in Action 

Scara I4-L Robot Family

The i4L is a compact SCARA robot which
offers strong performance at the lowest cost
of ownership. Simple integration with a compact
design, easy wall or table mounting, and unique
Ethernet or EtherCAT connectivity in the base.
Maximize uptime by means of interactive
maintenance alarms and RGB dome light.


Omron Cobra

Omron's Adept Cobra robots deliver performance unmatched in the industry. A high-performance SCARA robot system for mechanical assembly, material handling, packaging, machine tending, screw driving, and other applications that require fast and precise automation. Omron Adept Cobra Series robots deliver performance unmatched in the industry with the included SmartController™ motion controller.

  • ACE software deploys your applications through a user-friendly interface
  • High-resolution, absolute encoders give you high accuracy, superior slow-speed following, and easy calibration
  • High-efficiency, low-inertia Harmonic Drives and a lightweight arm deliver maximum acceleration8 kHz servo update rate improves path following and control
  • Integrated 10/100 Base-T Ethernet TCP/IP to control the robot through a PC, PLC, or controller
  • Available options for cleanrooms and ESD to prevent static electricity during operation

Learn more about Cobra | Cobra in Action | Buy Omron Cobra



Omron Quattro, Hornet & Delta

The Quattro™ Parallel robot excels at high-speed applications in packaging, manufacturing, assembly, and material handling. It is the only parallel robot (or "delta robot") in the world with our patented four-arm rotational platform, delivering maximum speed, maximum acceleration, and exceptional performance across the entire work envelope. Ultra-compact controls and embedded amplifiers improve footprint efficiency while simplifying installation.

Learn more about Quattro | Quattro in Action | Buy Omron Quattro

The Hornet 565 is a parallel robot for high-speed picking and packaging applications. The powerful controls are fully embedded into the base of the robot, saving valuable floor space and reducing installation costs and complexity. It features a hygienic design that minimizes contamination risks, including a standard IP65 rated work area and corrosion-resistant materials for easy washdown.

Learn more about Hornet | Hornet in Action | Buy Omron Hornet

The Delta solution can achieve up to 200 cycles per minute and can be synchronised with multiple conveyors to perform on-the-fly Pick & Place operations. There are 3 types of Delta robot arms available as Washdown, Delta and Mini Delta robot. The NJ controller offers a response time of 2 ms when controlling 8 Delta robots or 1 ms when controlling 4 robots.

Learn more about Delta | Delta in Action | Buy Omron Delta



Omron ePLC

The Omron ePLC (Programmable Logic Controllers) allows Omron robots to be programmed 100% in the PLC via ethernet/IP. These advanced PLCs streamline your manufacturing process by putting you fully in control of all aspects of your application. 

Omron NX Safety CPU Controller: Powerful, Robust Stand-Alone Safety System
The NX Safety Controller is a powerful and robust Stand-Alone Safety System that reaches the PLe according to EN 13849-1 and SIL3 according to IEC 61508.

The EtherNet/IP coupler unit allows for connection to almost any PLC via EtherNet/IP™ or standard Ethernet communications. In addition, the flexible hardware allows the NX safety I/O units to be mixed in any combination with standard NX I/O units.

Sysmac Studio software allows for configuration, programming, simulation, and monitoring functionality.

Learn more about NX | NX in Action | Buy NX-Series

Omron NJ
The Omron NJ5 series is the flagship of Omron's Sysmac NJ series of Machine Automation Controllers. It features a completely redesigned hardware platform with a powerful Intel® Atom™ processor, ideal for harsh environments. The fundamental shift from rigid ASIC architecture allows the NJ series to be adaptable and scalable to your needs. This compact controller with market-leading technology provides flexibility without compromising reliability.

Learn more about NJ | NJ in Action | Buy NJ-Series