Optex CD22-100VM122 Displacement Laser Sensor, 100mm +/-50mm Range, 0-10VDC QD

Optex-FA CD22 Brochure

Optex-FA CD22 Guide for Quick-Start

Optex-FA CD22 Instruction Manual

Optex-FA CD22 Sensor Cad Data

Item #: CD22-100VM122

Product Info

Product Line: Optex FA

High Performance Cost Effective Self Contained Displacement Sensor in Compact Housing

Compact Size perfect for online real time inspection during manufacturing.

Excellent Linearity with a Variety of Materials

Linearity around ±0.1% full scale or better even with stainless steel or black rubber.

Automatic Sampling Function

In addition to standard feedback, received light to laser power, the CD22 has automatic sampling function which enables stable measurement of metal surfaces and also black material by adjusting the sampling speed automatically.

Intuitive and Easy to Read Display

Bright 4 digit display in small housing, Intuitive set-up with 4 buttons, high end functions that are easily adjusted

Clamp and Hold Function

The clamp and hold function allows the sensor to ignore small holes in parts or targets with very rough surfaces. If the sensor detects a hold in a part instead of going to out of range the sensor will hold the last known good value for the amount of time set by the user.

Digital Sub-pixel Processing

Digital sub-pixel processing improves linearity by more than twice that of conventional laser measurement sensors. The CD22 sub-pixel processing divides one pixel in to 65536 sub-pixels to help produce a genuine wave form.

Item Specifications

Series
CD22
Sensing Mode
Laser Displacement Reflective
Self-Contained or Amp-Separate
Sensor Self-Contained
Sensing Beam
Visible Red Laser Beam
Beam Details
Red Semiconductor Laser, Wavelength 655nm, 1mW Max Output, Class II FDA (see Notification 50) Class 2 IEC/JIS
Optical Method
Diffuse
Optical Beam Type
Small beam spot
Beam Size
600 x 700µm
Measurement Range
100mm ±50mm
Repeat Accuracy
20µm
Supply Voltage Details
18 to 24VDC
Fastest Sample Rate
500µs
Best Response Time
See Sample Rate
Sensor Features
Output settable as NPN or PNP, display confirms sensing distance - set input for teaching, zero reset, sample hold, synch input - scalable analog, 0.1% linearity. SENSOR WARM-UP TIME 5 MIN
Control Output & Communication
Digital, Analog
Digital Output Details
1 each NPN or PNP (Selectable)
Analog Output Details
0 to 10VDC
Operating Temperature
–10 to +50° C
Material
Aluminum
IP Rating
IP67
Connection Type
Quick disconnect
Connection Method
Pigtail 300mm with M12 5 pin male connector
Item Weight
0.50 lbs per EA