.png){kind=logo}
.png){kind=logo}
Panasonic EX-19A-R Ultra-Slim Front Sensing Thrubeam Photoelectric Sensor - 1 m Sensing Range - Light-On - NPN - Robotic Cable
Item #:
EX-19A-R
Product Info
Panasonic Industrial Devices Sunx
Incredibly Small Photoelectric Sensor with Built-In Amplifier
Smallest Body - Just 3.5 mm (.138") Thick
With incredibly small dimensions, the EX-10 series can be mounted in very small spaces.
10mm W x 14.5mm H x 3.5mm D
.394" W x .571" H x .138" D
(thru-beam, front sensing type)
With incredibly small dimensions, the EX-10 series can be mounted in very small spaces.
10mm W x 14.5mm H x 3.5mm D
.394" W x .571" H x .138" D
(thru-beam, front sensing type)
Key Features:
- Panasonic (formerly Sunx) Ultra Slim Miniature Photoelectric Sensor
- 12 to 24 VDC
- Front Sensing Type. Only 3.5mm thick
- Thrubeam sensing with Red LED light source
- Sensing range 1 meter
- NPN output Light-On mode
- 2 meter robotic connection cable
- EX-19A includes the following 2 part numbers: EX-19P (Projector Portion) and EX-19AD (Detector Portion)
Flexible Mounting:
The diffuse reflective type sensor is front sensing and is so thin that it can be mounted nearly anywhere. The thru-beam type is available as front sensing type, as well as, side sensing type, allowing flexible mounting making it a flexible sensing solution.
The diffuse reflective type sensor is front sensing and is so thin that it can be mounted nearly anywhere. The thru-beam type is available as front sensing type, as well as, side sensing type, allowing flexible mounting making it a flexible sensing solution.
Uses Up To 65% Less Electricity style="margin-left: 10px; margin-bottom: 10px; float: right;" src="../image/descriptions/panasonic_ex-10_less_energy_usage.jpg" alt="Up to 65% Less Energy Usage" width="200" height="160">The EX-10 series achieves reductions in power consumption of up to 65 % and are environmentally friendly. Effective in products produced since October 2010.
Wide Variety of Narrow-Beam Types. Light Diffusion is Approx. Half of Standard Types.
Less Interference With No Slit, Narrow Pitch Can Be Set
The pitch of installation is half of conventional models, so that the close-installation is possible. No cost to purchase or install a slit.
The pitch of installation is half of conventional models, so that the close-installation is possible. No cost to purchase or install a slit.
Sense Small Objects Less Than ø0.5mm With No Slit
The EX-10 series is applicable of sensing minute objects.
The EX-10 series is applicable of sensing minute objects.
Long Sensing Range of 1m (3.281') with a Narrow Beam
Performance
High Speed Response Time: 0.5ms
The EX-10 Series is great for detecting small and highspeed traveling objects.
The EX-10 Series is great for detecting small and highspeed traveling objects.
Background Suppression
Even a specular background separated by 100 mm 3.937 in, or more, is not detected. Note: the background should be directly opposite. A spherical or curved background may be detected.
Even a specular background separated by 100 mm 3.937 in, or more, is not detected. Note: the background should be directly opposite. A spherical or curved background may be detected.
Reliably Detects Black Objects
The EX-10 series can reliably detect dark color objects due to it being a convergent reflective type sensor.
The EX-10 series can reliably detect dark color objects due to it being a convergent reflective type sensor.
Environmental Resistance
Improved Protection from Extraneous Light
The EX-10 series is significantly improved against inverter light and other extraneous light due to the incorporated inverter countermeasure circuit. * Effective in products produced since October 2010.
The EX-10 series is significantly improved against inverter light and other extraneous light due to the incorporated inverter countermeasure circuit. * Effective in products produced since October 2010.
Waterproof IP67
The sensor can be hosed down because of its IP67 construction and the non-corrosive stainless steel mounting bracket. Note: However, take care that if it is exposed to water splashes during operation, it may detect a water drop itself.
The sensor can be hosed down because of its IP67 construction and the non-corrosive stainless steel mounting bracket. Note: However, take care that if it is exposed to water splashes during operation, it may detect a water drop itself.
Bending Durability
Flexible cable type EX-?-R is available. It is most suitable for moving parts, such as robot arm, etc.
Flexible cable type EX-?-R is available. It is most suitable for moving parts, such as robot arm, etc.
Mounting / Size – Mountable with M3 Screws
Non-corrosive stainless steel type sensor mounting bracket is also available.
Item Specifications
-
EX-10
-
Miniature Ultra-thin
-
Front sense 3.5mm thick, H19 x W10
-
Thrubeam
-
ø2.0mm Min Detectable Object
-
Repeat accuracy of 0.05mm, high speed response of 0.5ms
-
Red LED
-
12 to 24VDC
-
1 meter
-
NPN
-
1 each NPN
-
No
-
Light-On
-
Polyethylene terephthalate enclosure, Polyalylate lens
-
-20º to +55º C
-
IP67
-
Cable 2m Robotic
-
0.09 lbs per EA
View Related Items
SUNX SUS BRKT EX10 FRONT (1PC) W/M2
SUNX SUS BRKT EX10 FRNT/SIDE (1PC) W/M2
SUNX STEEL BRKT EX10 FRONT (1PC) W/M2
SUNX STEEL BRKT EX10 FRNT/SIDE (1PC)W/M2
SUNX EX10 FRNT TBEAM SLIT MASK 1.2MM DIA
SUNX EX10 FRNT TBEAM SLIT MASK 1.5MM DIA
SUNX M2 MTG SCREW &WASHER (50PCS)
SUNX SENSOR ALIGNMENT CHECKER