Panasonic HL-T1010F Laser Sensor 10mm Wide Beam

Item Specifications

• Series
  HL-T1
• Sensing Mode
  Laser Thrubeam Array
• Self-Contained or Amp-Separate
  Sensor Less Controller
• Sensing Beam
  Visible Red Laser Beam
• Beam Details
  Red Semiconductor Laser, Wavelength 650nm, 0.35mW Max Output, Class II FDA, Class I IEC/JIS
• Optical Method
  Thrubeam - Edge, Gap, & Diameter sensing
• Optical Beam Type
  Collimated beam Array Thrubeam
• Beam Size
  Ø 10mm Wide Array
• Measurement Range
  500mm
• Repeat Accuracy
  4.0µm
• Measurement Range
  0 to 500mm
• Supply Voltage Details
  12 to 24 VDC
• Fastest Sample Rate
  150µs
• Best Response Time
  See Sample Rate
• Controller Features
  Dual digit display of measurement and judgement value. 13 sample rates from 1 to 4,096. Linear analog in both current and voltage. Option calculation module available for add/subtract function
• Sensor Features
  Narrow array laser beam 10mm wide for edge, gap, and width detection. Min sensing object Ø 0.1µm with 4µm repeatability.Measuring cycle of 150µs Interference prevention for two side-by-side sensor.
• Control Output & Communication
  Digital, Analog
• Digital Output Details
  3 each NPN or 3 each PNP with HL-AC1(P) Controller
• Analog Output Details
  4 to 20mA & ±4V with HL-AC1(P) Controller
• Operating Temperature
  0 to +50° C
• Material
  Enclosure: Polyetherimide enclosure, glass front cover
• IP Rating
  IP40
• Connection Type
  Quick disconnect
• Connection Method
  Pigtail 500mm with Molex type connector
• Item Weight
  0.10 lbs per EA