Optex FA TD1-010M8 Thrubeam Edge Sensor
Product Info
Edge Position Measurement Thrubeam Sensors
The TD1 series is ideal for equipment where edge control is required, such as for measurement of the end surfaces of components or sheet materials. The TD1 sensors use a CMOS sensor as the light receiving element, allowing for highly accurate edge position measurement of end surfaces. Includes TDCN-Y2-M8 Connection Cable Y type
Up To 300mm Measurement Range
In direction checking mode, the indicator will flash when the light axis is misaligned, notifying that the alignment should be checked. This makes it easier to check the light axis when installing sensors or during periodic maintenance.
Repeatability: ±5 um Linearity: ±0.4% of F.S.
Easy Light Axis Alignment
In direction checking mode, the indicator will flash when the light axis is misaligned, notifying that the alignment should be checked. This makes it easier to check the light axis when installing sensors or during periodic maintenance.
Compact Design
The compact size of the sensor head allows for easy installation even for devices with limited space. This makes it possible to keep equipment as small as possible.
Width/Gap Measurement
The measurement method used in a TD1 series product can be changed to suit the inspection application, such as when measuring the width of small electronic components or the gaps between rollers.
Item Specifications
-
TD1
-
Laser Thrubeam Array
-
Sensor Less Controller
-
Visible Red Laser Beam
-
Red Semiconductor Laser, Wavelength 660nm, 390µW Max Output, Class 1 IEC/JIC, Contact Ramco for FDA
-
Thrubeam - Edge, Gap, & Diameter sensing
-
Collimated beam Array Thrubeam
-
3mmx14mm Wide Array
-
300mm
-
±5µm
-
0 to 300mm
-
12 to 24VDC
-
500µs
-
See Sample Rate
-
Controller connects to two TD1 sensors and features OLED display with simple PB teaching for width and gap measurement and calculation function. Light axis alingment function makes easy installation
-
Compact design, Ideal for edge, gap, and diameter detection applications.Indicators provide easy light axis alignment. TDCN-Y2-M8 Y-Branch cable is included
-
Digital, Analog, Serial
-
3 each NPN/PNP Selectable using CDA-DM2 Controller
-
0 to 10VDC using CDA-DM2 Controller
-
RS-485 (Sensor Only)
-
–10 to +50° C (Sensor)
-
Alum Die-cast enclosure, glass lens
-
IP50
-
Quick disconnect
-
Pigtail 300mm with M8 4 pin male connector
-
0.15 lbs per EA